banner

Does the trickle charge damage the battery?

Many battery manufacturers do not recommend long-term use of trickle charge.

If trickle charging is used, the charge rate will be very low and sometimes intermittent. When charging the battery, the best smart charger can only be a temporary charge rate changes. They do not have a continuous low-rate charge function. Some battery dealers say that if a long-term trickle charge, only one-tenth of the battery energy will not be hurt. However, we have not seen any manufacturers to carry out such tests.

It is best to fully charge the battery, and then stored well. Do not perform additional trickle charge. So as to avoid accidental damage.

What is the most influential use of data cable?

Data wire, wire is part of it, but more important is the thread, that is, the interface. Now the wire on the market or similar, but the interface will affect the different transmission efficiency of the wire. Consider the connector, not only consider the material of the joint itself, but also taking into account the quality of the joint process, tightness, welding quality and interface of the coating and so on. In the actual selection of the need to take into account the integrity of the product, not from a single aspect to examine.

What is the difference between a fast charger and a quick charge

          The comparison of the two is practically meaningless. In the battery industry, the two chargers are not clearly defined. So manufacturers often mix them. One problem is that the time to charge a battery is dependent on the capacity of the battery being charged. A AAA nickel-cadmium (180 mAh) charger that takes 1 hour to fill a standard capacity may take up to 8 hours to fill a high-capacity NiMH battery (1500 mAh). The best way is to ignore these differences, roughly calculate the time required to fully charge the battery charger.

Will fast charging reduce battery life?

Not very serious. As long as you use a suitable smart charger, you can in almost an hour to almost all kinds of Ni-MH battery fully charged, and without any damage, battery life will not significantly reduce, may reduce less than 10% . Obviously, this is always better than using a slow charger. However, only a specially designed NiMH battery charger can be used to quickly charge most NiMH batteries. In addition, the design for the nickel-cadmium battery charging charger is likely to give Ni-MH battery overcharge.

What Is a USB Network Adapter?

    A universal serial bus (USB) network adapter is a computer accessory that enables a wireless or standard internet connection on the computer into which it is plugged. This type of adapter is connected to the computer through a normal USB port, and it very rarely requires more than a few clicks to install. USB network adapters occasionally are required for gaming consoles as well.

 

wireless network adapter is used mainly for older computers and occasionally laptops that lack built-in wireless, or Wi-Fi, capabilities. By adding Wi-Fi abilities to a computer, the user can connect to a network from anywhere within the range of that network. Though most laptops already have wireless functionality, some older models are without it. Installing a USB adapteron a laptop will enable the user to connect to wireless networks in places that offer Wi-Fi.

 

The wired USB network adapter is another option. It mainly is used in buildings that lack wireless internet, but it also is an option for people who prefer to be connected via a cable at all times. A wired USB network adapter essentially is a cord with a USB connection on one end and a networking cable connection on the other. It's particularly useful for computers that do not have a networking cable port.

 

There are quite a few different adapters created by various companies, but they all serve the same purpose. One of the main differences in the adapters lies in the operating system for which they are formatted. Most require a simple driver download before they are ready, but others work only with specific operating systems.

 

After the USB network adapter is plugged into the computer, there typically is little more required than simply to leave it plugged in. There normally will be a disc that comes with it that will run a quick installation of the adapter's required software. At this point, the adapter must remain plugged in at all times in order for the computer to maintain a connection to the wireless network.

 

The USB network adapter does not require a power cable, because it draws power from the computer to which it is connected. Some adapters come with separate antennas, and it's important to place them where they can pick up the strongest wireless signal. The antenna must be near the computer, but it should be placed away from walls and not in a place where the monitor or computer will block or interrupt the wireless signal.

 



MORE >

PARTNER

2016 © Shenzhen Rewoda Electronics Co., Ltd.     

Address:深圳市龙华新区大浪街道嘉安达大厦908室 Tel:+86-755-33525517 Fax:+86-755-28141823